Gai-tronics 12579-003 Monitored Relay Module (MRM) Manuale Utente Scaricare il pdf (Pagina 12)

Pub. 42004-716L2C

Model 12579-003 Monitored Relay Module Page

12 of 16

f:\standard ioms - current release\42004 instr. manuals\42004-716l2c.doc

05/12

Mode 5: IDC Non-supervision Multiple Switch (Dry Contact)

In this mode, any number of normally-open dry contact closures can be installed on the line. The loop

will not

be monitored for any faults in Mode 5.

Figure 10. IDC Non-Supervision Multiple Switch (Dry Contact)

Mode 5: IDC Non-Supervision (Wet Contact)

In this wet contact mode, shorting jumpers for each input must be moved from the factory default of

“dry” to “wet” contact mode. When in “wet” contact mode, the input can be activated during a 0 V

condition or a 24 V condition. The factory default setting is “24 V dc input when active” (position 2-3).

If “0 V dc input when active” is desired, move jumper from position 2-3 to position 1-2. The loop will

not

be monitored for any faults in Mode 5. Ensure the polarity of input connection is correct as it is

polarity sensitive.

Figure 11. IDC Non-Supervision (Wet Contact)

1 2 ... 7 8 9 10 11 12 13 14 15 16 17

Nessun commento

Gai-tronics 12579-003 Monitored Relay Module (MRM) Manuale Utente Pagina 12